Table of Contents
Advertisement
Fixing Problems
Step by Step
Possible cause 1:
Key affects other layer
If "Delete other layer" appears on the menu:
you tried to program a function or internal station number with LED
on a key that is already programmed on the second layer (for examp-
le, external station number).
Possible response:
Confirm "Delete other layer" to program the station number/function.
Possible cause 2:
If "Delete LED support" appears on the menu:
you tried to program a station number without LED or an external sta-
tion number on a key that is already programmed with an internal sta-
tion number with LED.
Possible response:
Confirm "Delete LED support" to save the station number. The inter-
nal station number already programmed remains on the other layer
without LED display.
Contacts for Resolving Problems
If you encounter a problem that lasts longer than five minutes, con-
tact your service personnel.
103
Advertisement
Table of Contents
