Table of Contents
Advertisement
Step by Step
Using System Functions from the Outside
(DISA: Direct Inward System Access)
If this function has been configured (contact your service personnel),
you can set up external outgoing calls from outside the system, just
like an internal user. You can also activate and deactivate the follow-
ing functions in your system:
• Reset services and functions,
code: #0
• Call forwarding, code:
• Lock and unlock all phones,
code:
66/#66
*
• Save PIN,
code:
93
*
• Send a message,
code:
68/#68
*
• Leave an advisory message,
code:
69/#69
*
• Group ringing, code:
• Group call, code:
• Suppress caller ID,
code:
86/#86
*
• Waiting tone, code:
• Open door, code:
• Door opener on/off, code:
• Control relay, code:
• Do not disturb, code:
• Ringer cutoff function, code:
• Speed-dialing, code:
• Associated service, code:
Precondition: You have a telephone that uses tone dialing (DTMF di-
aling) or you can switch your telephone to tone dialing. The tele-
phone is not connected to the system.
o
Set up a call to the system. Enter the station number (contact your
service personnel).
o
Wait for a continuous tone (if necessary switch the telephone to tone
dialing), then enter the internal number that has been assigned to you
and the associated PIN.
r
Enter the code (necessary only if programmed in the system).
o
Wait for a dial tone and then enter the code, such as
disturb on. Make other inputs as necessary; (refer to the operating in-
structions for pulse and DTMF telephones).
or
o
Dial the external number.
page 71
1/#1
page 18
*
page 63
page 65
page 66
page 68
81/#81
page 78
*
85/#85
page 78
*
page 61
87/#87
page 43
*
61
page 30
*
89/#89
*
90/#90
page 76
*
97/#97
page 60
*
98/#98
*
7
page 34
*
83
page 72
*
Using Other Functions
page 31
page 60
97 for Do not
*
73
Advertisement
Table of Contents
