ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Cutting action changing lever
4-1. Lock switch
4-2. ON/standby switch
5-1. Speed adjusting dial
6-1. Jig saw blade
7-1. Base
7-2. Hex wrench
8-1. Cover plate
8-2. Base
9-1. Anti-splintering device
9-2. Base
10-1. Dust nozzle
SPECIFICATIONS
Length of stroke
Max. cutting capacities
Strokes per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Noise
The
typical
A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The
vibration
total
determined according to EN60745:
Explanation of general view
10-2. Base
11-1. Clamp screw
12-1. Dust nozzle
12-2. Hose for vacuum cleaner
13-1. Cutting line
13-2. Base
15-1. Base
15-2. Hex wrench
15-3. Bolt
16-1. Bevel slot
16-2. Base
16-3. Bolt
16-4. Graduations
16-5. V-notch
16-6. Gear housing
17-1. Base
Model
Wood
Mild steel
Aluminum
-1
)
Overall length
Net weight
Rated voltage
noise
level
determined
) : 78 dB (A)
pA
value
(tri-axial
vector
DJV141
26 mm
135 mm
10 mm
20 mm
800 - 3,500
280 mm
2.4 kg
D.C. 14.4 V
ENE019-1
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG905-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
ENG900-1
power tool can differ from the declared emission
value depending on the ways in which the tool is
sum)
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
4
17-2. Hex wrench
17-3. Bolt
18-1. Starting hole
21-1. Rip fence
22-1. Hex wrench
22-2. Bolt
22-3. Fence guide
24-1. Fence guide
24-2. Threaded knob
24-3. Circular guide pin
26-1. Bolt
26-2. Ruler bar
27-1. Guide rail adapter
27-2. Screw
27-3. Guide rail
DJV181
26 mm
135 mm
10 mm
20 mm
800 - 3,500
298 mm
2.5 kg
D.C. 18 V
2
) : 6.5 m/s
h,B
2
2
) : 5.0 m/s
h,M
2
ENG901-1