How To Enter Service Mode - Omnivision PVQ-130W Service Manual

7.3.4.3.1. How to adjust:
Press CH UP/DOWN key on the remote control to adjust the value.
7.3.4.3.2. How to release from EVR PG Shifter Adjustment Mode:
Press STOP button or press the POWER button OFF.
The adjusted value will be written to Memory IC (IC6004).

7.3.4.4. HOW TO ENTER SERVICE MODE

1. Enter EVR adjustment mode.
2. Press DISPLAY key on the remote control for collapse scan.
Note:
Before pressing DISPLAY key on the remote control for collapse scan, select the
desired control function and move the shaded area to the value for adjustments you
will proceed.
Fig. E2-7
Fig. E2-8
98