Table of Contents
Advertisement
5.2.2. HOW TO READ THE VALUES OF THE CYLINDRICAL TYPE CHIP
COMPONENTS.
The widest color band must be read first for value.
1. RESISTOR
There are two types (ERD10LLJ... and ERD10TLJ...) of chip parts.
A. ERD10LLJ: Refer to above type.
B. ERD10TLJ: The narrow color band must be read first for value.
If this part is included in the parts list, be sure that the color band is read properly
when servicing.
2. CAPACITOR
Because of the width of the color bands, the reading direction cannot be specified.
However, the color band can be read on either side. Be sure to confirm the value
using the schematic diagram.
CAUTION :
Once chip parts are removed, they must not be reused.
Always use a new part when installing a chip part.
6. DISASSEMBLY/ASSEMBLY PROCEDURES
6.1. CABINET SECTION
6.1.1. Disassembly Flowchart
32
Advertisement
Table of Contents
