7.3.4.2.1. How to adjust:
1. Press CH UP/DOWN key on the remote control to select control function to be
adjusted.
Important Note:
Make a note of the original value of the controls before modifying in case the
wrong control is adjusted.
2. Press VOL UP/DOWN key on the remote control so that the shaded area moves to
the value.
3. Press CH UP/DOWN key on the remote control to adjust the value of the selected
control.
Note:
You can select a desired channel by using the numbered keys on the remote
control in EVR adjustment mode.
4. Press VOL UP/DOWN key on the remote control so that the shaded area moves to
the control function.
Fig. E2-2
Fig. E2-3
Fig. E2-4
96