Speaker Connections; 4-Speaker System-Normal Mode; 2-Speaker System Plus Subwoofer-Bridge Mode; 2-Speaker System-Bridge Mode - JVC KS-DR3004 Instruction Manual

SPEAKER CONNECTIONS

SPEAKER CONNECTIONS
The proper lead connected to each SPEAKER OUTPUT terminal is AWG
18 to AWG 12. (The cross section is about 0.8 mm
C 4-speaker system—Normal Mode
• Use the speakers with an impedance of 2 Ω to 8 Ω.
① Right Front
③ Right Rear
D 2-speaker system plus subwoofer—Bridge Mode
• Use the speakers with an impedance of 2 Ω to 8 Ω.
• Use the subwoofer with an impedance of 4 Ω to 8 Ω.
⑤ Right Front
⑦ Subwoofer
E 2-speaker system—Bridge Mode
• Use the speakers with an impedance of 4 Ω to 8 Ω.
• Be sure to connect the line output from the receiver to the left (L)
jack on this unit.
⑧ Right Front
② Left Front
④ Left Rear
⑥ Left Front
⑨ Left Front
English
to 3.3 mm .)
2 2