Mitsubishi Wi-Fi Control Installation Manual page 6

Wi-Fi Control: Installation Instructions
Information for users:
The following steps explain how to connect the MAC-559IF-E
Adaptor to a router.
KEY (LED LIGHTS):
ON
1
Check Wi-Fi and WPS are enabled
on your router. The connection
procedure varies depending on
your router – refer to your router
manual for more information.
3
Activate WPS on your adaptor by
using a small object to press and hold
the WPS button for two seconds.
6
OFF FLASHING
2
Activate WPS mode on your router.
This will be enabled for a set
period allowing approximately two
minutes to complete Step 3.
To do so please refer to your
router's manual.
Please Note: The WPS and
router reset buttons may
be similar on some routers.
Please exercise caution as
resetting your router will
erase network configuration.