Mitsubishi Wi-Fi Control Installation Manual page 4

Wi-Fi Control: Installation Instructions
Information for installers:
The following steps explain how to connect the MAC-559IF-E
Adaptor to a Mitsubishi Electric Heat Pump.
EQUIPMENT REQUIRED FOR INSTALL:
MAC-559IF-E
Adaptor
Important Note: Before going to the users home, ensure they have a WPS
capable router and WPA2-AES encryption can be set. For ease of access,
please do not install the Wi-Fi Adaptor inside high wall indoor unit cabinets.
1
Record the adaptor's MAC, ID
number and serial numbers on page
2 of the Wi-Fi Installation Guide.
*Please note: the appearance of the outdoor unit may differ dependant on model type
4
WPS Enabled
Router
Wi-Fi
Installation
Guide
INSTALLATION GUIDE
2
Isolate the outdoor unit
power has been disconnected from
the complete system.
Tools to remove
cover of indoor
unit
and verify
*