How To Play The Radio; Choose Band; Fm Frequency Range; Stereo/Mono Selection - Kaito KA29 Operation Manual

RADIO
NOTE:
Press <EXIT> in Main Menu to display the time. When
the time is displayed, press <MENU> to go to Main
Menu.

HOW TO PLAY THE RADIO?

In Main Menu, select Radio and press <MENU>
to listen to FM, the frequency shows on the
display.
Repeatedly pressing <RADIO/MP3> to enter
either Radio or Music Mode.
Band symbol
FM
Frequency display
Frequency point
RADIO mode
NOTE:
Due to current interference, it is not recommended to
use FM radio when the radio is connected to an external
adapter or a computer.
CHOOSE BANDS
In Radio Mode, press <FM/
or <SW/ > to select your desired band.
The display will show the band symbol that
you are listening to.
When listening to SW, press <
change <m> bands.
7
Stereo symbol
89.8
Battery symbol
MHz
Unit
>, <AM/
SW/ > to
FM F REQUENCY RANGE
SELECT FM FREQUENCY RANGE
When listening to FM, press <MENU> to enter
the below sub-menu:
- Save: Store the station into memory
manually
- Delete: Delete single memory
- Delete all: Delete all stored memories
- Auto Search: Auto tuning storage
- Ordinary band: 87-108MHz
- Campus radio: 64-108MHz
- Japanese FM: 76-90MHz
- Exit
FM STEREO/MONO SELECTION
When listening to FM, press <
stereo/mono listening. If [
stereo listening is selected, press <
to change to mono listening and the mono symbol
[ ] will show. You can not active stereo listening
when the radio signal you are receiving is mono.
Suggestions:
> 1. Stereo listening is for strong signal broadcasts
and music programs.
2. For weak signal broadcasts or voice programs,
please choose mono. (Because stereo decoding
may produce noises.)
> to select
FM/
] shows in the display,
> again
FM/
8