U disk directory: Auto turn on the radio with the
music file in the micro SD/TF card or USB drive
When the alarm is activated, [
the display, the radio will alarm with the selected
mode when reaching the preset time.
If the selected mode is [Ring Embedded], you can
press any button to turn off the ringtone when the
alarm goes off.
Select [Restore factory settings] in System
Settings, press <MENU> and notice [Restore
factory sett, NO] shows on the display. Press
> or <
> to make [NO] or [YES] shows
alternately. Select [YES] and press <MENU> to
] appears on
USE AS AN ACTIVE LOUDSPEAKER
The radio has line-in function, can be used as
an active loudspeaker by connecting it to other
media devices such as laptop, voice recorder or
other MP3 players with a line-in cable.
Plug one end of the line-in cable to the earphone
jack of the media device, and the other end into
<AUX> jack on the side of the radio. [
will show on the display, then play the audio in
the media device.
The radio can also be used as a speaker of
computer. Use a USB cable to connect the
radio and a computer, all the audio from the
computer will be played via the speaker of the
radio. To turn off this function, press <
turn off the radio.