Auto Tuning; Jog Tuning; Auto Search (Ats); Direct Frequency Entry - Kaito KA29 Operation Manual

TUNE I N S TATIONS

Auto tuning:

1. Turn on the radio and select [Radio] in Main
Menu.
2. Adjust the volume to an appropriate level and
choose your desired band.
3. Press and hold <
seconds, then release to auto tune into the
next available station. If the auto-tuned station
frequency is inaccurate, please use manual
tuning to find the accurate frequency point.

Jog tuning:

1. Turn on the radio and select [Radio] in Main
Menu.
2. Adjust the volume to an appropriate level and
choose your desired band.
3. Rotate <Tuning knob> and notice the frequency
changing in the display, stop rotating when the
radio receives a satisfactory station.

Auto search (ATS):

1. T urn on the radio and select [Radio] in Main
Menu.
2. A djust the volume to an appropriate level and
choose your desired band.
3. Press <MENU> to open the sub-menu and
select [Auto search], press <MENU> again to
start auto tuning and store all the available
stations into memory.
11
+
> or < > for about 2
TUNE I N S TATIONS
Memory location
FM M005
89.8
Memory Locations:
FM: M001 - M440
AM: M001 - M132
SW: M001 - M928

Direct frequency entry

1. Turn on the radio and select [Radio] in Main
Menu.
2. Adjust the volume to an appropriate level and
choose your desired band.
3. Input the frequency numbers that corresponds
to a station's frequency by using the key board,
and then press the band button to enter the
station you need.

Memory recall

1. Turn on the radio and select [Radio] in Main
Menu.
2. Press <M+/EQ> or <M-/ > to select a station
that stored within the memory.

STORING STATIONS MANUALLY

Select your desired station, press <MENU> to
open the sub-menu and select [Save], press
<MENU> again to confirm. The stored station's
memory location will be stored into the memory
by the order of the frequency from low to high.
MHz
12