Spares; Optional - Megger OTS100AF User Manual

Only Megger supplied accessories can be used with the OTS range. Non approved equip-
ment cannot be guaranteed to work with the OTS.
Factory fitted accessories depending on order configuration
Internal printer
■ ■
Electrode sets – IEC, ASTM and full electrode set containing one of each type of electrode
■ ■
Vessel lid mounted impeller for use with 400 ml vessel(standard red impeller supplied, see page 9)
■ ■
Power lead
■ ■
PowerDB Lite CD
■ ■
Optional accessories & spares
VCM100D voltage check meter
■ ■
VCM80D voltage check meter
■ ■
Vessel assembly 400 ml (no electrodes)
■ ■
Vessel assembly 150 ml (no electrodes)
■ ■
Vessel lid mounted impeller for use with 400 ml vessel
■ ■
(standard red impeller supplied, see page 9)
ASTM alternative propeller shaft assembly
■ ■
IEC alternative propeller shaft assembly
■ ■
OTS super-user kit
■ ■
Included accessories:
Vessel 400 ml assembly
■
Vessel 150 ml assembly
■
Stirrer lid assembly with standard impeller
■
ASTM alternative propeller shaft assembly
■
IEC alternative propeller shaft assembly
■
The Megger guide to insulating oil dielectric breakdown testing booklet
■
Carry case
■
Electrode set IEC 156
■ ■
Electrode set ASTM D 877/1816
■ ■
Full electrode set – contains all electrodes
■ ■
Printer paper
■ ■
Barcode reader, USB
■ ■
Electrodes - Spherical (pair)
■ ■
Electrodes - Mushroom (pair)
■ ■
Electrodes - Cylindrical (pair)
■ ■
Electrodes - Non-standard cylindrical with
■ ■
0,5 mm edge radius (pair)
Electrode gauge set 1, 2, 2.5, 2.54 mm
■ ■
20
1001-105
1001-801
1001-473
1001-474
1001-102
1007-153
1007-154
1007-467s
1001-477
1001-478
1001-479
25991-001
1001-047
6220-484
6220-580
6220-483
6220-538
1002-144