Safety Warnings - Megger OTS100AF User Manual

G

SAFETY WARNINGS

Safety warnings and precautions must be read and understood before the OTS100AF/OTS80AF/OTS60AF is used.
They must be observed during use.
The OTS100AF/80AF/60AF must only be used in the way intended and for the stated purposes described by
■ ■
Megger.
The OTS100AF/80AF/60AF must not be used if any part of it is damaged.
■ ■
The OTS100AF/80AF/60AF must be properly earthed. A supplementary earth terminal is provided.
■ ■
Position the OTS100AF/80AF/60AF so that power can be easily removed.
■ ■
The OTS100AF/80AF/60AF must not be used in wet locations or with rain falling on the instrument.
■ ■
The OTS100AF/80AF/60AF must only be used for testing electrical grades of insulating liquids. No other objects
■ ■
or substances should be placed in the test chamber.
The OTS100AF/80AF/60AF must only be used with one of Megger's precision test vessels or VCM100D/VCM80D
■ ■
correctly fitted on the support horns in the test chamber.
Replacement fuses must be of the correct type and rating.
■ ■
Calibration or repair must only be carried out by a Megger qualified repair facility.
■ ■
The test chamber must be kept clean and free from lint or other fibres.
■ ■
The OTS100AF/80AF/60AF weigh 30 kg. Care should be taken when lifting the instrument.
■ ■
It is prohibited to insert foreign objects into any gap on the instrument before or during a test.
■ ■
Unit must be used in a well ventilated location. Small quantities of Ozone may be created after prolonged
■ ■
testing.
THE OTS100AF/OTS80AF/OTS60AF MUST ONLY BE USED BY SUITABLY TRAINED AND
IF THESE INSTRUMENTS ARE NOT USED IN THE MANNER SPECIFIED PROTECTION
2
NOTE
COMPETENT PERSONS.
MAY BE IMPAIRED