Table of Contents
Advertisement
Congratulations on purchasing the Latronics PV Edge Grid Interactive Inverter. Rapidly increasing interest in
the solar market has resulted in the latest advancement in inverter design allowing the feeding of electrical
power from photovoltaic solar panels directly into the grid. Using state of the art microprocessor controls
coupled with the reliability and safety of the proven toroidal transformer technology, LATRONICS is proud to
present this high quality, fully automatic Grid Connect Inverter.
We strongly suggest that you read through the next few pages of this manual, which explains all the
modes of operation and relevant safety precautions for your power Inverter.
****
Grid Interactive solar systems have become increasingly popular in recent years. These systems do not
require batteries for storage and have a very simple configuration.
Figure 1
Block diagram
BEFORE INSTALLATION:
• Ensure the Inverter has not been damaged in transit.
• The unit must be placed in a well ventilated and protected area, not exposed to the open environment, and
free from contaminates (ie exhaust gases, sea air, dust etc.).
• The PV edge is designed for indoor installation in a suitable location where ambient temperature will not
exceed rated values.
• As the PV edge has a wall mountable enclosure, ensure proper air circulation for cooling of the heat sink
on the rear.
LATRONIC SUNPOWER PTY LTD
INTRODUCTION
Please remember to complete and return your warranty card ****
INSTALLATION
Doc. No: M61
www.latronics.com.au
Page 2
Advertisement
Table of Contents
