Using state of the art microprocessor controls coupled with the reliability and safety of the proven toroidal transformer technology, LATRONICS is proud to present this high quality, fully automatic Grid Connect Inverter.
Page 3
AC Output Mains Meter DC Input E N A link standard, to be removed only when optional AH Meter fitted Figure 2 PV Edge internal wiring diagram LATRONIC SUNPOWER PTY LTD Doc. No: M61 www.latronics.com.au Page 3...
. Eg. 1 string of 6x75W (450W) plus another string of 6x75W (450W) plus a string of 6x100W (600W) would be acceptable and give a total of 1500W. LATRONIC SUNPOWER PTY LTD Doc. No: M61 www.latronics.com.au Page 4...
This light will flash for 90 seconds when the inverter connects to the AC grid and performs a voltage and frequency stability check before feeding power into the AC grid. When Led 3 is in either of these 2 modes all other Leds will be OFF. LATRONIC SUNPOWER PTY LTD Doc. No: M61 www.latronics.com.au Page 5...
Any faulty part replaced under Warranty becomes the property of the Company for purposes of examination and claim under proprietary Warranty. • Keep your receipt as proof of purchase, should any difficulties arise concerning the return of the registration card. LATRONIC SUNPOWER PTY LTD Doc. No: M61 www.latronics.com.au Page 7...
C-Tick mark for the EMC emission standard EN55014. ESSA approval to Australian Grid Connect Guidelines approval No. No.51973 Safety Certificate for mains connected apparatus Approval No. Q01307 Bradley Cowin Development Engineer 2.08.2001 LATRONIC SUNPOWER PTY LTD Doc. No: M61 www.latronics.com.au Page 9...