Appendixc Switch Lightning Protection; Installing Ac Power Arrester(Lightning Protection Cable Row - D-Link dgs-8000 SERIES Hardware Installation Manual

DGS-8000 Series Hardware Installation Guide
AppendixC
Protection
1. Installing AC Power Arrester(lightning
protection cable row)
The external lightning protection cable row shall be used on the AC power port to prevent the
switch from being struck by lightning when the AC power cable is introduced from the
outdoor and directly connected to the power port of the switch. The lightning protection cable
row is fixed on the cabinet, operating table or the wall in the machine room using the line
buttons and screws.
Figure C-1 Schematic Diagram for the Power Arrester
AppendixC Switch Lighting Protection
Switch Lightning
i