Table of Contents
Advertisement
340
4-3. Bluetooth
■
Skipping Voice Guidance (for faster operation)
●
The Bluetooth
ignition is switched to ACC or ON (requires less than 15 seconds).
●
When operating the audio unit or the A/C while using Bluetooth
Free, the beep sounds or voice guidance (audio unit)/cannot be heard.
Security Setting (Type A)
If a passcode is set, the system cannot be activated unless the pass-
code is input.
Do this function only when parked. It is too distracting to attempt while driv-
ing and you may make too many errors to be effective.
■
Passcode setting
1
Press the pick-up button or talk button with a short press.
2
Say: [Beep] "Setup"
3
Prompt: "Select one of the following: Pairing options, confirma-
tion prompts, language, passcode, select phone or select music
player."
4
Say: [Beep] "Passcode"
5
Prompt: "Passcode is disabled. Would you like to enable it?"
6
Say: [Beep] "Yes"
7
Prompt: "Please say a 4-digit passcode. Remember this pass-
code. It will be required to use this system."
8
Say: [Beep] "XXXX" (Say a desired 4-digit passcode, "PCode".)
9
Prompt: "Passcode XXXX (Passcode, PCode). Is this correct?"
10
Say: [Beep] "Yes"
11
Prompt: "Passcode is enabled."
■
Using Bluetooth
1
Press the pick-up button or talk button with a short press.
2
Prompt: "Hands-Free system is locked. State the passcode to
continue."
3
Say: [Beep] "XXXX" (Say the set passcode "PCode".)
4
If the correct passcode is input, voice guidance "XXXXXX... (Ex.
"Mary's device") (Device tag) is connected" is announced.
If the passcode is incorrect, voice guidance "XXXX (4-digit pass-
code, Pcode) incorrect passcode, please try again" is
announced.
YARIS iA_OM_OM99N89z_(U)
®
®
Hands-Free system is operable several seconds after the
®
Hands-Free with a passcode
®
Hands-
Advertisement
Table of Contents
