Table of Contents
Advertisement
180
3-4. Switches and Controls
Turn and Lane-Change Signals
The ignition must be switched ON to use the turn and lane-change
signals.
Turn Signals
Move the signal lever down (for a
left turn) or up (for a right turn) to
the stop position. The signal will
self-cancel after the turn is com-
pleted.
If the indicator light continues to
flash after a turn, manually return
the lever to its original position.
The turn signal indicators (green)
in the combination meter flash
according to the operation of the
turn signal lever to show which
signal is working.
●
If an indicator light stays on without flashing or if it flashes abnormally, one
of the turn signal bulbs may be burned out.
●
A customized function is available to change the turn indicator sound vol-
ume. (→P. 560)
Lane-Change Signals
Move the lever halfway toward the direction of the lane change—until
the indicator flashes—and hold it there. It will return to the off position
when released.
YARIS iA_OM_OM99N89z_(U)
Right turn
Right lane change
OFF
Left lane change
Left turn
Advertisement
Table of Contents
