Table of Contents
Advertisement
Test Grid Pattern Motion
The lit panel of the Test Grid can move from panel to panel automatically or manually.
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Test Patterns.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Auto Move or Manual.
5.
Press the <SCROLL/ENTER> knob.
6.
For Manual, turn the <SCROLL/ENTER> knob to select from H Position (horizontal) or V
Position (vertical).
7.
Press the <SCROLL/ENTER> knob.
8.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
value, from 1–_ _ _ (this value determined by the number of panels mapped to the selected port).
9.
Repeat steps 5-8 to manually test that all panels were mapped correctly.
Test Grid Speed
To set the speed of the Auto Move:
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Moving.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
speed, from 1–255 (fast to slow).
5.
Press the <SCROLL/ENTER> knob.
Test Grid Pattern Color
To select the color of the panel of the lit panel in the test grid:
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Patterns Color. The default setting is White.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Red, Green, Blue, or Custom.
5.
Press the <SCROLL/ENTER> knob.
6.
If Custom, turn the <SCROLL/ENTER> knob to select from Red, Green, or Blue.
7.
Press the <SCROLL/ENTER> knob.
8.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
color value, from 0–255.
9.
Press the <SCROLL/ENTER> knob.
10. Repeat steps 6-9 until the lit panel is the desired color.
Mapping by Port
The rest of the options under Map determine the mapping for each port separately. Each of the following
options appears 4 times, once for each port.
Wall Size
The Wall Size setting determines the number and arrangement of panels by width and height for the
selected port.
1.
Access the
Map
2.
Turn the <SCROLL/ENTER> knob to select Wall Size WxH under Port 1, Port 2, Port 3, or Port
4.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
horizontal quantity, from 1–255.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
vertical quantity, from 1–255.
7.
Press the <SCROLL/ENTER> knob.
32
menu.
menu.
menu.
menu.
O
PERATION
VIP Drive 43s User Manual Rev. 1
Advertisement
Table of Contents
