Table of Contents
Advertisement
O
PERATION
Factory Reset
To reset the product to factory default settings:
1.
Access the
Advanced
2.
Turn the <SCROLL/ENTER> knob until Factory Reset is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Press the <SCROLL/ENTER> knob to confirm, or <MENU> to cancel.
Do not remove the product from power until it has finished performing the factory
reset.
Customized Button
Aside from their default functions, the <SCALE> and <MAP> buttons can be assigned to either black out
or freeze the output.
1.
Access the
Advanced
2.
Turn the <SCROLL/ENTER> knob until Customized Button is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select Scale or Map.
5.
Press the <SCROLL/ENTER> knob.
6.
For:
•
Scale, turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select from
Scale (accesses the
output).
•
Map, turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select from Map
(accesses the Map menu), Blackout (Blacks out the output), or Freeze (Freezes the output).
7.
Press the <SCROLL/ENTER> knob.
Output Format
To select a pre-defined output format:
1.
Access the
Advanced
2.
Turn the <SCROLL/ENTER> knob until Output Format is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Standard will be selected. Press the <SCROLL/ENTER> knob again.
5.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select from 800x600@60,
1024x768@60, 1024x768@75, 1280x720@60, 1280x720@50, 1280x768@60, 1280x800@60,
1280x1024@60, 1360x768@60, 1366x768@60, 1400x1050@60, 1440x900@60,
1600x1200@60, 1680x1050@60, 1920x1080@60, 1920x1080@50, 1920x1200@60,
2048x1152@60, 2560x812@60, or 2560x816@60.
6.
Press the <SCROLL/ENTER> knob.
Scale
The Scale settings determine the size of the video output as well as a the position of the output on the
connected panel assembly. In PIP mode, the
To access the Scale menu, press <SCALE> (if it is set to default), or:
1.
Press <MENU> to access the menu.
2.
Turn the <SCROLL/ENTER> knob until Scale is selected.
3.
Press the <SCROLL/ENTER> knob.
Horizontal Size
To set the horizontal size of the product's output:
1.
Access the
Scale
2.
Turn the <SCROLL/ENTER> knob until Scale is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob until H Size is selected.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
value, from 2–_ _ _ _ (This value is determined by the
7.
Press the <SCROLL/ENTER> knob.
VIP Drive 43s User Manual Rev. 1
menu.
menu.
Scale
menu), Blackout (Blacks out the output), or Freeze (Freezes the
menu.
Input Mode
menu.
determines which input is being scaled.
Video
Input).
27
Advertisement
Table of Contents
