Table of Contents
Advertisement
O
PERATION
Set Width
The Set Width option determines the total width in pixels of the connected panel assembly.
1.
Access the
Map
2.
Turn the <SCROLL/ENTER> knob to select Set Width.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select H Size.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob to select from Auto (populates width from map settings) or
Manual (enter width manually).
7.
Press the <SCROLL/ENTER> knob.
8.
If Auto, go to step 10. If Manual, turn the <SCROLL/ENTER> knob clockwise or
counterclockwise to increase or decrease the pixel width, from 2–_ _ _ _ (this value determined
by the
Video
Input).
9.
Press the <SCROLL/ENTER> knob.
10. Turn the <SCROLL/ENTER> knob to select Set Width.
11. Press the <SCROLL/ENTER> knob.
For Set Width to function correctly, the minimum
Test Grid
The Test Grid function sends a customizable grid to the connected panel assembly, with a single panel at a
time lit up to test the mapping.
To access the Test Grid menu:
1.
Access the
Map
2.
Turn the <SCROLL/ENTER> knob to select Test Grid.
3.
Press the <SCROLL/ENTER> knob.
To enable or disable the Test Grid:
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Test Grid.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Off or On.
5.
Press the <SCROLL/ENTER> knob.
Test Grid Port
To select which port to test:
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Port.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Port 1–4.
5.
Press the <SCROLL/ENTER> knob.
Test Grid Color
To select the color of the Test Grid:
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Grid Color.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Red, Green, or Yellow.
5.
Press the <SCROLL/ENTER> knob.
Test Grid Type
There are 4 available types of test grid.
1.
Access the
Test Grid
2.
Turn the <SCROLL/ENTER> knob to select Type.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob to select from Cross, Row, Column, or Rectangle.
5.
Press the <SCROLL/ENTER> knob.
VIP Drive 43s User Manual Rev. 1
menu.
menu.
menu.
menu.
menu.
menu.
Wall Size
(WxH) is 3x2.
31
Advertisement
Table of Contents
