Table of Contents
Advertisement
Vertical Size
To set the vertical size of the product's output:
1.
Access the
Scale
2.
Turn the <SCROLL/ENTER> knob until Scale is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob until V Size is selected.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
value, from 2–_ _ _ _ (This value is determined by the
7.
Press the <SCROLL/ENTER> knob.
Horizontal and Vertical Scale
To set both the horizontal and vertical sizes of the product's output simultaneously:
1.
Access the
Scale
2.
Turn the <SCROLL/ENTER> knob until Scale is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob until H/V Size is selected.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
value, from 2–_ _ _ _ (This value is determined by the
7.
Press the <SCROLL/ENTER> knob. The H Size and V Size fields will automatically populate in
proportion.
Horizontal Offset
The Horizontal Offset setting determines how far to the right on the connected panel assembly the output
of this VIP Drive 43s begins.
1.
Access the
Scale
2.
Turn the <SCROLL/ENTER> knob until Scale is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob until H Position is selected.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
value, from 0–_ _ _ _ (This value is determined by the difference between the
the
Horizontal
Size).
7.
Press the <SCROLL/ENTER> knob.
Vertical Offset
The Vertical Offset setting determines how far down on the connected panel assembly the output of this
VIP Drive 43s begins.
1.
Access the
Scale
2.
Turn the <SCROLL/ENTER> knob until Scale is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob until V Position is selected.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
value, from 0–_ _ _ _ (This value is determined by the difference between the
the
Vertical
Size).
7.
Press the <SCROLL/ENTER> knob.
Auto Scale
The Auto Scale function sets the scaling based on the mapping, the connected panel assembly, and the
Video
Input.
1.
Access the
Scale
2.
Turn the <SCROLL/ENTER> knob until Scale is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob until Auto Scale is selected.
5.
Press the <SCROLL/ENTER> knob.
6.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select No or Yes.
7.
Press the <SCROLL/ENTER> knob.
28
menu.
menu.
menu.
menu.
menu.
Video
Input).
Video
Input).
Video Input
Video Input
VIP Drive 43s User Manual Rev. 1
O
PERATION
and
and
Advertisement
Table of Contents
