Table of Contents
Advertisement
Brightness
The brightness setting controls the total output level of the connected video panels.
1.
Press <MENU> to access the menu.
2.
Turn the <SCROLL/ENTER> knob until Brightness is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
brightness, from 0–100.
5.
Press the <SCROLL/ENTER> knob.
Front Panel Lock
The front panel interface of the VIP Drive 43s can be locked with a 4-digit passcode.
1.
Press <MENU> to access the menu.
2.
Turn the <SCROLL/ENTER> knob until Front Panel Lock is selected.
3.
Press the <SCROLL/ENTER> knob. Front Panel Lock should be selected. Press the
<SCROLL/ENTER> knob again.
4.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to select Off or On.
5.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or decrease the
first digit, from 0–9. Repeat with the second, third, and fourth digits. Select each digit carefully.
6.
Press the <SCROLL/ENTER> knob.
7.
Repeat step 5 to enter the same number, to confirm the new passcode.
8.
Press the <SCROLL/ENTER> knob.
To unlock the front panel interface of the VIP Drive 43s:
1.
Press <MENU>, <SCALE>, <MAP>, or the <SCROLL/ENTER> knob.
2.
Use the <SCROLL/ENTER> knob to enter the passcode as it was set in the previous instruction.
Alternatively, entering 1 2 1 2 will also unlock the front panel interface.
3.
Press the <SCROLL/ENTER> knob.
Color Adjustments
The Color Adjustments settings control output settings such as the contrast and color balance.
•
Contrast controls the separation of different colors in the output.
•
Saturation controls the intensity of all colors.
•
Sharpness determines the amount of detail in the output.
•
Color Temperature sets maximum values for each color, which affects the color temperature of the
video output.
•
Gamma controls the gamma correction, which applies a non-linear function to the tonal ranges in
the video before output, which balances the brightness and darkness of the resulting video.
•
Reset sets Color Adjustment settings to back to default.
To alter the Color Adjustment settings:
1.
Press <MENU> to access the menu.
2.
Turn the <SCROLL/ENTER> knob until Color Adjustments is selected.
3.
Press the <SCROLL/ENTER> knob.
4.
Use the <SCROLL/ENTER> knob to select from Contrast, Saturation, Sharpness, Red Level,
Color Temperature, or Reset.
5.
For:
•
Contrast, Saturation, or Sharpness:
a.
Press the <SCROLL/ENTER> knob.
b.
Turn the <SCROLL/ENTER> knob clockwise or counterclockwise to increase or
decrease the selected value, from 0–100.
c.
Press the <SCROLL/ENTER> knob.
•
Gamma:
a.
Press the <SCROLL/ENTER> knob.
b.
Use the <SCROLL/ENTER> knob to select from Linear, sRGB, -1.2, 1.2, -1.4, 1.4, -
1.6, or 1.6.
c.
Press the <SCROLL/ENTER> knob.
14
O
PERATION
VIP Drive 43s User Manual Rev. 1
Advertisement
Table of Contents
