Enterprise Environment - Nortel Contivity 1010 Manual

All users on the private network must renew their IP addresses. For further
information, see your Microsoft documentation. When the branch office tunnels
are established, public access to the Internet is replaced with access to the central
office.
Note: The BOQS will remain accessible after the information is entered.
The network administrator must change the admin account (username/
password) to restrict access.
After the VPN services are provisioned, branch office networks are logically
connected to a central office network or to a NOC network. Branch office end
users can rerun BOQS multiple times to restore the initial VPN configuration or to
fix data errors.
BOQS supports two network topologies:
• Enterprise topology where the network operations center is located within the
central office.
• Service Provider topology where the network operations center is
independent entity from central office

Enterprise environment

Enterprises rely on the Internet for a wide range of business operations
Locating a Contivity VPN Switch at the central office and Contivity 1010/1050/
1100 series of switches at the branch office locations provides a secure solution.
Before you deploy the Contivity 1010, 1050, or 1100 at the local sites, you must
configure routing and tunnels on the switch at the central office.
For routing, you must do the following:
• Enable global RIP service.
• Enable RIP on private interface.
• Disallow importing default routes in the group where responder tunnels are
created.
Chapter 2 Getting started 29
New Features for the Contivity 1010/1050/1100
.