Table of Contents
Advertisement
Utilisation
Connecting the trailer to a bicycle
Danger!
Do not connect the
fulfilled:
The trailer is fully loaded.
ƒ
The children are wearing bicycle helmets and are properly fastened in.
ƒ
The buggy wheel has been removed.
ƒ
The tow bar load has been checked and is within the permissible range (3 – 8 kg).
ƒ
Remove the retaining cotter pin from the tow bar's
f
coupler pocket.
f
Push the tow bar onto the coupler on the bicycle so
that the cotter pin holes in the coupler and coupler
pocket are aligned.
Insert the cotter pin into the hole and lock the cotter
f
pin fastening.
Check that the connection between the coupler and
f
the tow bar is secure.
Guide the tow bar's retaining strap through the
f
braces of the rear wheel so that the trailer is securely
connected to the bicycle frame.
f
Hook the retaining strap with the carabiner hook
into the eye on the tow bar. Make sure that it cannot
flutter into the rear wheel's spokes during the journey.
Danger!
Always secure the tow bar to the bicycle frame with the retaining strap. This ensures that
the trailer will remain connected even if the tow bar becomes detached from the coupler.
Irrespective, the coupler must always be properly mounted and the connection to the
tow bar must be secured with the locked cotter pin. Otherwise the tow bar can be
come detached and can be pushed into the rear wheel's spokes during braking.
Using the comfort functions
The
offers some climate functions for the cabin and can be conveniently adjusted by
Sportrex2
adapting the backrest tilt and the suspension.
Using the climate functions
Adjusting the 2-in-1 canopy
The 2-in-1 canopy is comprised of an insect net and a weather canopy:
The inner part of the 2-in-1 canopy must be closed during every journey because the integral
ƒ
insect net provides protection against insects and small stones.
26 – 02|2016 – Subject to change.
to a bicycle until the following conditions have been
Sportrex2
Sportrex2 – Q6000A
Advertisement
Table of Contents
