Table of Contents
Advertisement
Assembly
Below you can read all the information that you will need to assemble your
Make sure that you have sufficient space to assemble it.
f
Also pay attention to the door width at the place of installation: The
with the wheel guards fitted.
Have a size 4 Allen key to hand (not supplied).
f
Perform each of the instructions step by step.
f
If necessary, follow the QR code to call up a video about
f
assembly and operation on the Internet. Using the
as an example, the video shows a few functions that also
apply to the
Sportrex2
Danger!
Never perform assembly work if there are children in the cabin. Keep children away
from the vehicle during assembly.
When handling moving components, make sure that your hands or fingers do not get
trapped.
Unfolding the cabin
f
Place the collapsed cabin in the assembly area.
f
Position yourself behind the cabin.
f
Pull both sides of the rear cabin frame all the way up.
Open the storage space cover.
f
Pull the rear frame rod assembly evenly back until
f
it engages audibly.
Push the stabiliser tubes from behind into the two
f
slots in the side panels. These are located under the
windows.
Sportrex2 – Q6000A
:
Sportrex2
Sportrex2
Sportrex1
Subject to change. – 02|2016 – 13
properly.
is 85 cm wide
Advertisement
Table of Contents
