ROHS EmCORE-i2702 User Manual page 51

BIOS
IDE HDD Block Mode
It allows HDD controller to use the fast block mode to transfer data to and
from HDD.
Setting: Disabled, Enabled (Default).
On-Chip Primary PCI IDE
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Select Enabled to activate each channel separately.
Setting: Disabled, Enabled (Default).
IDE Primary Master/Slave PIO
It allows your system HDD controller to run faster.
Rather than having the BIOS issue with a series of commands that
transferring to or from the disk drive, PIO (Programmed Input/Output) allows
the BIOS to communicate with the controller and CPU directly.
When Auto is selected, the BIOS will select the best available mode.
Setting: Auto (Default), Mode 0, Mode 1, Mode 2, Mode , Mode .
IDE Primary Master/Slave UDMA
It allows your system to improve disk I/O throughput to MB/sec with the
Ultra DMA feature.
Setting: Disabled, Auto (Default).
On Chip Serial ATA
The integrated peripheral controller contains an SATA interface. Select Enable
to activate the interface.
Setting: Disabled, Enabled (Default).
- 7 -