Table of Contents
Advertisement
IDE Primary HDDs
The onboard PCI IDE connectors provide Primary channel for connecting up
to two IDE hard disks or other IDE devices.
The channel can support up to two hard disks; the first is the "Master" and the
second is the "Slave".
Press <Enter> to configure the hard disk. The selections include Auto, Manual,
and None. Select 'Manual' to define the drive information manually. You will be
asked to enter the following items.
Cylinder:
Head:
Precomp:
Landing Zone: Landing zone
Sector:
The Access Mode selections are as follows:
CHS
LBA
Large (for MS-DOS only)
Auto
Video
This field selects the type of video display card installed in your system.
You can choose the following video display cards:
EGA/VGA
CGA 0
CGA 80
MONO
Number of cylinders
Number of read/write heads
Write precompensation
Number of sectors
(HD < 28MB)
(HD > 28MB and supports Logical Block Addressing)
For EGA, VGA, SEGA, SVGA or PGA monitor
adapters. (default)
Power up in 0 column mode.
Power up in 80 column mode.
For Hercules or MDA adapters.
- 0 -
BIOS
Advertisement
Table of Contents
