Table of Contents
Advertisement
Push the handles
2
as far forward
as possible.
The pushchair folds.
Close the locking hook
1.
3.
Assembling the
pushchair
This is how to assemble the
wheels:
Lay the pushchair back with its
handles
2
to the floor.
Push the two swivel wheels
5
onto
the end of the front legs 6.
Press down the swivel wheels
5
the front legs
6
until they engage.
Repeat this with the other wheels.
Caution! Pull on the wheels to
check if they engaged properly.
To take off the wheels:
Lay the pushchair back with the
push handles
2
on the floor.
Press on the locking tab
40
and pull
the swivel wheels
5
from the front
legs 6.
on
How to mount the safety bar 9:
Slide the ends of the safety bar
into the recesses
10
in the armrests
8
until the locking button
7
engages.
To take off the safety bar 9:
Press from below on the locking
button
7
and pull out the safety bar
9
from the recess 10.
How to fasten the hood 11:
Clip the hood clips
12
above the
armrests
8
onto the frame tube.
Press both hood tensioners
13
downwards.
Fasten the Velcro fasteners on the
side of the seat cover.
How to take off the hood 11:
Undo the Velcro fasteners.
Pull the hood clip
12
upwards at the
recessed grip.
The hood
11
disengages.
9
Advertisement
Table of Contents
