Paper Specification - Tally DT-230 User Manual

Tally Dascom DT-210/230
5.3

Paper specification

Paper type
Form
Roll paper diameter
Size
Min. core diameter
Take-up roll paper width
Paper width
• Paper must not be pasted to the roll paper spool.
• The remaining amount of the roll paper when a roll paper near-end is
detected differs depending on the spool type.
Printable Area
The printable area of a paper with width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ± 0.008"}
(576 dots) and the space on the right and left sides are approximately 3.7 ± 2 mm {0.15 ± 0.079"}.
Specified thermal paper
Roll paper
83 mm {3.27"} maximum
13mm
80 + 0.5/-1.0 mm
79.5 ± 0.5 mm
CAUTION
33