Orantek IP506 Series User Manual page 31

Network
UPNP Setup
1. Tips: If set port range is 8150~8350, camera will ask router to add a port forwarding
rule automatically. In this rule, the internal port is camera default port 80, the external
port is 8150, and IP address is camera's IP. Use this setting, users can visit the camera
from Internet through the router with this URL http://routeripaddress:8150.
2. Tips: If there are several cameras in Local Network, the first one which first be opened
will use 8150 as external port, and second one will use 8151, third one use 8152 etc.
Every camera will remember its port, it will preferentially use this port in next power on.
The camera supports UPnP which is enabled by
default. This function requires a Windows XP/Vista
operating system. It is a quick way to discover the
camera on your network. Please make sure that
the UPnP function is enabled on your PC.
UPnP - Enable or disable the UPnP function.
Gateway HTTP/RTSP port forwarding -
or disable this function.
External HTTP/RTSP port range -
port, automatically adds a port forwarding rule
to a router via UPnP protocol. Please Notes that
not all routers support this function. Refer to
your router manual for further details.
Gateway RTP port forwarding -
function, users can use mobile phone,
RealPlayer or QuickTime Player to visit the
camera from Internet through the router.
External RTP port range - 30000—30200
default. (See TCP/IP setup)
Click Apply to confirm your setting.
Enable
Using this
Enable this
38