Orantek IP506 Series User Manual page 13

Manually Setting TCP/IP Settings for a Camera
In most cases, this is not required as the router will assign the correct
settings to the camera. It is however useful if you want to setup the
TCP/IP settings of the camera before you connect to it, if DHCP is
disabled across your network, or if you have subnet network
problems.
1) Launch Camera Setup program to detect cameras on the local
network.
2)
Click on "Setup" button and the following setup interface will pop
up.
3)
Enter a unique name for the camera, the location (optional) and
leave the default port number as 80.
automatically" and "Obtain DNS server address automatically"
selected by default, if you are confident enough to enter your own
settings, you can do so by selecting "Use the following IP address" and
follow the guidelines on the next page.
4)
To obtain the IP addresses specific to your network, click "Start"
then "Run" and type "cmd" in the text box and click "Ok". The will
bring up the MS-DOS prompt and in this window type "ipconfig/all"
and press enter. A screen similar to the one below will be displayed.
"Obtain an IP address
are
20