Orantek IP506 Series User Manual page 15

Program installation & Usage
The camera Setup utility can easily and quickly detect cameras
connected to your local network and list them on the Camera Setup
window; also you can use the camera Setup utility to assign an IP
address to each camera.
1) Insert the Installation CD into your CD-ROM drive and the
installation screen should appear automatically (See image below). If
it does not, click "Start" then "Run". In the text field enter
"D:\autorun.exe" (if "D:" is the letter of your CD-ROM Drive)
2) Click on "Install Camera Setup" and with the following screen Click
"Next".
3) If you want to change the default folder click "Change" to replace
otherwise click "Next".
Click "Install" to install IP Camera Software.
4)
5) Click "Finish" to end the installation. You should now find an icon
on the desktop.
22