Table of Contents
Advertisement
User Interface
Home -
takes you back to your Homepage.
Settings -
will take you to the cameras internal settings.
Audio Upload
- Press and release to start sending audio from your computer's microphone to the camera
speakers.
Press and release to stop sending audio.
Volume----
Mute -
Click the Mute button to mute the audio.
Slider -
the slide block horizontally to adjust volume.
Image----
Snapshot -
Press the Snapshot button to capture a still image of the camera view. Click Save to store the
snapshot on your computer, the file is automatically assigned the data & time of the snapshot. Press Cancel to
exit.
Zoom -
Click on the + button and the cursor turns to a magnifier. Move the magnifier to the desired location
and click on an image area. Press - button to return to the normal view.
Record-----
Recording -
Press the Record button to record video and audio (if enabled). This will save the file in ASF
format on your PC.
Recording options -
Click this button to set the recoding parameters. You can set record path, video file size
and select whether to star recording automatically when motion is detected and the length of the recording in
seconds.
Size-----
Image size -
There are three Image Size options: [640x480] [320x240] [160x120] Please Notes that this only
changes the image size being viewed not the image size the camera is transmitting and/or recording. To
change the transmitting/recording image size, please refer to the Stream Setup.
25
Advertisement
Table of Contents
