Table of Contents
Advertisement
Camera
Camera Setup
From the home page click
settings
password.
Notes:
If the camera is inversely installed, images flip horizontally and images flip
vertically should be turned on at the same time.
and enter the administrator user name and
Camera:
Light frequency-
Two options: 50Hz & 60Hz. Set
according to the mains frequency in the country of
use. For UK this would be 50Hz.
Image mirror-
Image can be flipped from left to right.
Image flip vertical-
Image can be flipped up and
down.
Moonlight mode-
Turn
On/off
according to the light intensity of the area being
monitored manually.
Power LED light-
Turn on/off the power & network
LED indicator of camera.
Show FPS in ActiveX-
Show FPS On/Off in ActiveX
control.
Microphone-Turn
on/off
the built-in microphone.
Volume-
Adjusts the volume of the microphone from
0~14 where 0 is the lowest.
G.726 bit rate-
Four options: 16, 24, 32, and 40(kbps).
Determines the quality of the audio being
transmitted.
AMR bit rate-
Eight options will Determines the
quality of the audio being transmitted.
Speaker out –
enable or disable speaker out function
Volume –
control the Volume of the sound
Click
Apply
to confirm your settings.
the brightness setting
28
Advertisement
Table of Contents
