CAB MACH1 Operator's Manual page 34

8 Accessories
34 34
Function Test
1. Switch the printer on.
2. Press the FEED button (15).
3. Label is transported forwards and detached from the backing material.
15
10 11
Fig. 34 Function of Present Sensor
i
Note!
The label (10) will be peeled from the liner (11) while it passes through the Present Sensor.
There is a paper sensor on the Present Sensor module. It will stop the printing if it is covered by label.
Remove the last printed label and the printer will then continue to print next label.