Table of Contents
Advertisement
6
Instructions for use Hartenberger High-Tech-UW-Lamp nano compact
ARTICLE DESCRIPTION POWER PACK
W
Fig. 2: power pack
S
HALOGEN BULB
The 6V Halogen bulb is plugged into the G4 socket. The bulb can be removed
for replacement or as a precaution during transport by simply pulling it out of
the socket.
T
SPARE-O-RING
The O-ring (40 x 3,0 50° Hardness) is located in a groove in the power pack.
U
HALOGEN BULB STOWAGE
The halogen bulb stowage compartments can be used for storing spare bulbs
and/or stowing the bulb during transport.
V
CELL PACK
The cell pack is plugged in to the power pack and can be removed/replaced
in seconds. The cell pack consists of a Lithium Manganese (LiMn) cell block,
a micro processor electronic and the socket for the halogen bulb including
stowage for 2 halogen bulbs.
W
CONTACT PINS
The contact pins serve as an electrical and mechanical connection between
the power pack and the housing electronic module and for charging the cell
pack.
TECHNICAL SPECIFICATIONS
APPROX. BURN TIME IN MINUTES WITH LIMN CELL PACK 7,2V / 3,8AH
Halogen Bulb 6V
Time of use at 50%
Time of use at 75%
Time of use at 100%
Time of use at 125%
©Hartenberger Unterwassertechnische Geräte GmbH Rights reserved for technical changes. Issue 01.2011
H a
r t e
n b
e r g
n a
n o
e r
c o
m p
a c
t
30W
10W
20W
130
260
100
200
130
65
50
100
V
LED 4x3W
80
150
60
120
40
75
30
60
S
T
U
LED 9x2,5W (R)
80
60
40
30
Advertisement
Table of Contents
