Table of Contents
Advertisement
4
Instructions for use Hartenberger High-Tech-UW-Lamp nano compact
ARTICLE DESCRIPTION HOUSING
Fig. 1: housing
A
FRONT SEAL / FRONT GLASS PLATE
The front glass plate with the 0-ring (48 x 3 60° h ardness) is pressed into the
housing during the assembly by the manufacturer. It can only be opened by
an authorised workshop.
B
FRONT COVER (REFLECTOR COVER)
The standard front cover is equipped with a spot reflector for use with halogen
bulbs. Flood reflectors and/or chemically matt coated front glasses are
available as options.
C
FRONT HOUSING COVER (LED-CONNECTION)
The front housing cover is also available with 4 x 3 Watt LED spots as an
option.
D
PLUG MODULE FOR LED OPERATION
The LED plug module is plugged in to the halogen bulb socket when the lamp
is to be used with LEDs.
EF
O-RINGS
40 x 3,0 and 48x1,6 mm 50° hardness
G
HOUSING / BODY
The housing / body is sealed with the front and the rear screw fitting.
HI
O-RINGS
40 x 3,0 and 48x1,6 mm 50° hardness.
©Hartenberger Unterwassertechnische Geräte GmbH Rights reserved for technical changes. Issue 01.2011
Advertisement
Table of Contents
