Service Manual
11. Removal Procedure
Note:Take A1 panel for example.
Step
1.Remove front grill and filter sub-assy 2
Pull the filter sub-assy 2 outward by
hand to remove the filter.
2. Remove left & right side plate
Remove left side plate: unscrew 2
screws as diagram shown to remove
left side plate.
Remove right side plate: unscrew
2 screws of right side plate to remove it.
3.Remove rear plate
Remove the 12 screws fixing rear
plate to remove the rear plate and cable
cross plate and cable cross plate and
rubber plug.
Maintenance
Warning: disconnect power supply before
removal; discharge the refrigerant completely
before unsoldering the pipes.
Procedure
Filter sub-assy 2
Front grill
Srews
Cover of drainage
Screws
hole
Filter Sub-assy 2
Front grill
&
Left
right side plate
Cable cross plate
Real plare
Rubber Plug
49