EWM T 4.00 - AC/DC Comfort 2.0 Operating Instruction page 70

Welding procedure
Machine configuration menu
Display
70
Setting/selection
Service menu
Any changes to the service menu should be agreed with the authorised service
personnel.
Reset (to factory setting)
------- Disabled (ex works)
------- Reset the values in the machine configuration menu
------ Complete reset of all values and settings
Resetting is performed when exiting the menu (
Software version query (example)
07.= ------ system bus ID
03c0= --- version number
System bus ID and version number are separated by a dot.
Only qualified service personnel may change the parameters!
Only qualified service personnel may change the parameters!
Soft ignition
------- Function enabled (ex works)
------- Function disabled
Ignition pulse limit
Setting 0 ms–15 ms (increments of 1 ms)
PCB state – qualified service personnel only!
).
099-00T400-EW501
21.10.2016