NEC NVM-DFx Manual page 8

Programming a Subscriber's Mailbox
4) Enter the desired settings in each data field for the following Pop3 Email options:
4
■
Email Integration - The Email Integration feature (optional) allows a
specific number of Subscribers to be integrated with the Email system.
Select Yes to enable Email Integration for this Subscriber mailbox.
■
Email Integration Send Mode - This option allows you to select whether
only voice messages, only Fax messages, or both voice and Fax messages
will be sent to the subscriber through the SMTP Email integration.
■
Email Name - The Email address where the voice mail will be received.
■
Smtp Server - Name or IP Address of the SMTP Server
■
Domain Name - The SMTP domain name if available. Otherwise, leave this
field blank.
■
Smtp Port - Normally, the port number will be 25. If a Secure Socket Layer
(SSL) is being used, enter 465 as the port number.
■
Smtp SSL - Secure Socket Layer. If this feature is enabled, make sure that
465 is entered as the port number.
■
Smtp Authentication - Authentication code (if required by the ISP)
■
Smtp Account - The Email address for this subscriber, for example -
petera@ctlinc.com
■
Smtp Password - The password that would normally be used to by this
subscriber to access his Email
■
Pop3 Server - Name or IP Address of the SMTP Server
■
Pop3 Port - Normally, the port number will be 110. Enter 995 if Secure
Socket is being used.
■
Pop3 SSL - Secure Socket Layer. If this feature is enabled, make sure that 995
is entered as the Pop3 port number.
■
Pop3 Account - The Email address for this subscriber
■
Pop3 Password - The password that would normally be used to by this
subscriber to access his Email
NVM-DFx - SMTP Email Integration