Kodak verite 55 plus Extended User Manual page 57

Solving the power problems
Removing and reinstalling the software
Enabling the USB port in Windows®
English
• The unit and your PC cannot exchange data.
• Make sure the power supply is attached correctly to the unit
1
Press (Power) to turn the unit Off.
2
Disconnect the AC plug from the AC outlet.
3
Wait 30 seconds and then reconnect the AC plug to the AC outlet.
4
Press (Power) to turn the unit On.
• Make sure the unit is not in sleep mode
If the power light is blinking On and Off slowly, then the unit is in sleep mode.
1
Disconnect the AC plug from the AC outlet.
2
Wait 30 seconds and then reconnect the AC plug to the AC outlet.
3
Press (Power) to turn the unit On.
If the unit is not working properly, or if a communication error message appears when you try to
use the unit, then you may need to remove and reinstall the software.
Using Windows® 10 / 8.1 / 8 / 7 / Vista
1
Open All Programs or All apps.
Click [Start] button, Click [All Apps], and then select the printer software folder
"KODAK VERITE" from the list (Windows® 10 / 8.1).
Display [Start] screen, right-click for [All Apps] icon to fade into the bottom right, click [All
Apps], select the printer software folder "KODAK VERITE" from the list (Windows® 8).
Click [Start] button, Click [All Programs], and then select the printer software folder
"KODAK VERITE" from the list (Windows® 7 / Vista).
2
Select Uninstall.
3
Follow the instructions on your PC screen to remove the printer software.
4
Restart the PC before reinstalling the printer software.
5
Click Cancel on all New Hardware Found screens.
6
From your computer go to
"DOWNLOADS" tab.
7
Select the model [Verité 55 PLUS] from [Select Model Number].
8
Click "Drivers and Software" tab.
9
Click OS you use.
10
Click [PC Drivers & Software].
11
Click the version number on the far-right.
»
Refer to "Before you install the printer driver" on page 17.
• To confirm that the USB port is enabled on your PC:
Using Windows® 10 / 8.1 / 8 / 7 / Vista
1
Right-click [Start] (Windows® 10 / 8.1).
Right-click at the bottom left corner on your desktop (Windows® 8),
Click [Start] button (Windows® 7 / Vista).
2
Click Control panel > Hardware and Sound.
3
Under Devices and Printers, click Device Manager.
4
Double-click Universal Serial Bus Controller.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled. For more
information, see your PC documentation.
57
www.kodakverite.com/support and select the
Continued on next page.