TDK VELO CD REWRITER Installation And User Manual page 20

KD.tdk.03202 40xHardware V12 10/16/02 04:52 PM
16X
PERFORMANCE SPECIFICATIONS: 52X
Burst Read 16.6 MB/sec
Average Random Access 140ms
Brushless
Spindle Motor
Buffer 2MB
FRONT PANEL:
Eject Eject Button
Manual Emergency / Software Eject
Disc Loading Auto
Headphone Jack Stereo mini-jack, 0.5V
Volume Control Thumbwheel
CD-Audio Controls Stop/Eject
BACK PANEL:
Jumper Switches Cable Select, Master, Slave
DC +5V:1.2A
Power Consumption
DC +12V :1.2A
ENVIRONMENTAL CONDITIONS:
Operating Temp. 5˚ to 50˚ degrees Celsius
Operating Humidity 15% to 80% non-condensing
Storage Temp. -40˚ to 60˚ degrees Celsius
Storage Humidity 15% to 90% non-condensing
DIMENSIONS AND WEIGHT:
Dimensions (w/h/d) 145.8mm x 41.3mm x 190mm
Weight 2.7lbs or 1kg
RELIABILITY:
MTBF 70,000 POH@25%duty cycle
Tray Loading 30,000 Load Cycles
Information subject to change without notice.
32
veloCD ReWRITER : User's Manual
Page 32
16X 16X
48X 40X
16.6 MB/sec 16.6 MB/sec
80ms 130ms
Brushless Brushless
2MB 2MB
Eject Button Eject Button
Manual Emergency / Software Eject Manual Emergency / Software Eject
Auto Auto
Stereo mini-jack, 0.5V Stereo mini-jack, 0.5V at 33ohms
Thumbwheel Thumbwheel
Stop/Eject Stop/Eject
Cable Select, Master, Slave Cable Select, Master, Slave
DC +5V:1.2A DC +5V:1.2A
DC +12V :1.2A DC +12V :1.2A
5˚ to 50˚ degrees Celsius 5˚ to 40˚ degrees Celsius
15% to 80% non-condensing 20% to 80% non-condensing
-40˚ to 60˚ degrees Celsius -30˚ to 60˚ degrees Celsius
15% to 90% non-condensing 90% non-condensing
148mm x 42.3mm x 194.2mm 145.8mm x 41.3mm x 190mm
2.7lbs or 1 kg 1.0 kg
70,000 POH - 100,000 POH@25%duty cycle 30,000 POH-70,000 POH@25%duty cycle
30,000 Load Cycles 20,000 - 30,000 Load Cycles
TECHNICAL SUPPORT
Keep TDK's email, web site, and phone numbers in a convenient location as indicated below. Keep
your drive's serial number and a copy of your sales receipt handy as well.
If you experience a problem while installing or operating your veloCD ReWRITER, please refer first to
the relevant sections of this manual regarding setup and installation (Chapters 1–3). If you do not
uncover the solution there, please refer next to the maintenance and troubleshooting chapter that
begins on page 21.
It contains solutions to the most common types of problems fielded by our technical support staff.
You may also wish to refer to the Frequently Asked Questions (FAQ) section of our web site to assist
you in troubleshooting the problem on your own.
If you have not been successful in your quest, our Technical Support Department will help you solve
problems that relate specifically to your veloCD ReWRITER. In many cases, a problem that appears to
be caused by your veloCD ReWRITER actually originates in another part of your computer. In such
instances, our technical support staff will try to help you identify the part at fault and will refer you
to the manufacturer of that part for further assistance.
HOW TO CONTACT US
There are several ways for you to contact TDK's Technical Support Department:
• Visit our web site (www.velocd.tdk.com) for answers to Frequently Asked Questions.
Send us email at velocd@tdksupport.com. Include your telephone number and the hours during
•
which you can be reached. Be as detailed as possible in describing your problem. Please include
system configuration, hardware and software, as well as versions of drivers used.
Call 800-835-8326 and select the technical support extension.
•
B
APPENDIX
NOTE: Most new CD-ROM drives can read CD-RW discs.
Many older drives may not be able to read CD-RW discs.
NOTE: Australian Users should call 1800.651.917 for TDK
Technical Support or e-mail techsupport@tdk.com.au.
33
Appendix B : Technical Support