LAMAX X7 Mira User Manual page 9

6. Switching modes
Pressing the "MODE" button allows you to switch between modes: Video / Photo /
Gallery. The mode icon appears at the top of the screen.
7. Video recording: modes and settings
a. Capturing video
Put the camera in "Video" mode by pressing the "MODE" button and to record press
the shutter button. An animation is now displayed in the upper right-hand corner
of the display. To stop recording press the shutter button again and the recording
animation disappears. Whilst filming, the audio recording can be enabled or disabled
by pressing the "UP" button and also, recorded file can be locked by pressing the
"DOWN" button. This changes the corresponding icon in the upper left-hand corner
of the display.
b. "Video" settings (video camera icon)
• Video resolution – select the video resolution and frame rate.
1080p at 30 fps
720p at 60 fps
720p at 30 fps
• Loop recording – this function is important when using the camera as a car camera.
When enabled, the camera continuously records and if it runs out of space on the SD
card it will automatically overwrite the oldest, unlocked recordings.
Off
1 min
3 min
5 min
• G-Sensor – this additional function is also useful when using the camera in a car. When
enabled, if there is a collision the recordings will be automatically locked against
deletion. In this settings menu, you can adjust the sensitivity of the G-Sensor.
- 9 -