Switching On And Off - Technogym EXCITE BIKE User Manual

Switching on and off

To turn 700 and 500 versions of the equipment on, switch the switch to "I"
position.
To turn 700 SP and 500 SP versions of the equipment on, start pedalling.
When switched on, a beep sounds and all the control panel LEDs light up.
After a quick system check (reset), the equipment is ready for use.
In this mode, the following functions are enabled:
- calculation of heart rate, if measured;
- reading of access codes for configuration menu (see the Configuration Menu section in the software part).
39
Bike Excite