Air Filter; Muffler Screen - Jet JIN3500E Operation Manual

maintenance
• Do not tilt the generator when adding engine oil. This could result
in overfilling and damage to the engine. Don't allow foreign ob-
jects to fall into engine.
• Oil and gasoline could pollute the environment, don't throw it in
the trash or pour it on the ground.

AIR FIlTER

MUFFlER SCREEN

• The engine and muffler will be very hot after the engine has been
run. Avoid touching the engine and muffler while they are still hot
with any part of your body or clothing during inspection or repair.
28
NOTICE
1. Unscrew the screw (1) and take off the
left exterior cover (2).
2. Remove the air filter cover and foam ele-
ment (3).
3. Wash the foam element in solvent and
dry it.
4. Add oil to the foam element and squeeze
out excess oil. The foam element should
be wet but not dripping, to avoid dam-
age.
5. Insert the foam element into the air filter
case.
TIP: Be sure the foam element sealing
surface matches the air filter so there is
no air leak. The engine should never run
without the air filter; excessive poison-
ous gas will lead to piston and cylinder
wear.
6. Install the air filter case cover in its origi-
nal position.
WARNING