Jet JIN3500E Operation Manual page 23

• Do not overload. The total load of all electrical appliances must
not exceed the supply range of the generator. Overloading will
damage the generator.
• When supplying precision equipment, electronic controllers, PCs,
electronic computers, microcomputer based equipment or battery
chargers, keep the generator a sufficient distance away to prevent
electrical interference from the engine. Also ensure that electrical
noise from the engine does not interfere with any other electrical
devices located near the generator.
• If the generator is to supply medical equipment, advice should
first be obtained from the manufacturer, a medical professional or
hospital.
• Some electrical appliances or general-purpose electric motors
have high starting currents, and cannot therefore be used, even if
they lie within the supply ranges given in the above table. Consult
the equipment manufacturer for further advice.
NOTICE
operation
23