Digital Display Meter; Oil Warning Light - Jet JIN3500E Operation Manual

DIGITAl DISPlAy METER

1. Multimeter
2. Liquid crystal display
3. Operating key
4. Oil warming light
5. Overload indicator light
6. AC pilot light

OIl WARNING lIGHT

control function
liquid crystal display
Normal Operation:
During the normal operation, the
operation key (3) for switching the display
cycle showing: voltage current power-
accumulative time current time.
In case of failed operation:
U> a: AC over voltage, indicating the
character of AC (alternative indication
of AC and digit)
b: DC over voltage, indicating the
character of DC (alternative indication
of DC and digit)
U< a: AC under-voltage, indicating the
character of AC (alternative indication
of AC and digit)
b: DC under-voltage, indicating the
character of DC (alternative indication
of DC and digit)
I> Output over current of generator
Output short circuit of generator
Over heat of generator
Maintenance time
When the oil level falls below the lower level,
the oil warning light comes on and then the
engine stops automatically. Unless you refill
with oil, the engine will not start again.
TIP: If the engine stalls or does not start,
turn the engine switch to "ON" and then
pull the recoil starter. If the oil warning light
flickers for a few seconds, the engine oil is
insufficient. Add oil and restart.
11