30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
NOTES:
1
Do not pinch the power supply cord between the range and the wall.
2
Do not seal the range to the side cabinets.
24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet
when the bottom of wood or metal cabinet is protected by not less than 1/4" (0.64 cm)
3
flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015"
(0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum, or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance when the cabinet is unprotected.
4
For cutouts below 22 7/8"(58.1 cm), appliance will slightly show out of the cabinet.
5
Allow at least 19 ¼" (48.9 cm) clearance for door depth when it is open.
22 7/8" (58.1 cm) min.
23 1/4" (59.05 cm) max.
(see Note 4)
1 1/8"
(2.86 cm)
FRONT
OF
CABINET
A. HEIGHT (Under
B. WIDTH
Cooktop)
35 5/8" (90.5 cm) -
30"
36 5/8" (93 cm)
(76,2 cm)
F
Ref.
Door Open
(see note 5)
C. COOKTOP
D. TOTAL DEPTH
WIDTH
TO FRONT OF
RANGE
31 5/16"
28 5/16" (71,9 cm)
(79.5 cm)
E. CUTOUT WIDTH***
F. CUTOUT DEPTH
(Countertop and
cabinet)
30±1/16"
21 3/4" (55,2 cm) Min.
22 1/8" (56,2 cm) Max
(76,2±0,15 cm)
24" (61 cm) Min. with
2
Side Panel
G. HEIGHT OF
COUNTERTOP
36 5/8" (93 cm) Max.
35 5/8" (90.5 cm) Min.
backguard